Calcium carbonate for plastics is the most widely used mineral filler in the polymer industry, and choosing the right grade can cut cost while improving stiffness and processability. ELT (Egyptian Limestone Tiles) is a leading Egyptian producer of coated calcium carbonate for plastics, masterbatch and compounding, exported factory-direct worldwide.
💬 WhatsApp Us✉️ Email Our Experts📞 Call Us
As one of the leading marble and granite companies in Egypt, ELT also supplies Egyptian marble, Egyptian granite and Egyptian limestone tiles factory-direct, alongside its industrial calcium carbonate and limestone range.
Why use calcium carbonate for plastics?
Calcium carbonate for plastics does three jobs at once: it lowers cost by replacing a share of resin, it adds stiffness and dimensional stability, and it improves processing by carrying heat and reducing cycle times. In polyolefins like PE and PP it raises rigidity and impact balance; in PVC it improves toughness and weatherability. Used as a filler masterbatch, it can make up a significant fraction of the final product while keeping mechanical properties in spec.
Coated vs uncoated grades
For plastics, coated calcium carbonate is usually preferred. A thin stearic-acid coating makes the powder hydrophobic so it disperses evenly in the polymer melt, prevents agglomeration, and improves output and surface finish. ELT supplies coated and uncoated Egyptian calcium carbonate across a range of fine micron sizes, so compounders can match the filler to film, sheet, pipe, profile or injection-moulding lines. Tight top-cut control is critical for thin films, and every grade ships with a datasheet.
Applications in the polymer industry
Calcium carbonate for plastics appears in HDPE and PP filler masterbatch, PVC pipes and profiles, blown and cast film, raffia and woven sacks, cables, non-woven fabrics, and moulded goods. The same Egyptian limestone also serves as a paint extender and as limestone flux for metallurgy, so a single supplier can cover several lines. Calcium carbonate’s broad role across industry is summarised in the mineral overview on Wikipedia.
Quality control for compounders
Dispersion problems in plastics almost always trace back to inconsistent filler. As a quarry-to-mill producer, ELT controls brightness, purity, particle size and coating level batch to batch, and supplies a certificate of analysis with every shipment. That repeatability protects your line speed and your reject rate, which is why compounders across the region rely on Egyptian coated calcium carbonate from ELT.
Pricing, MOQ and export from Egypt
Bought factory-direct, Egyptian calcium carbonate for plastics is highly competitive for full-container and bulk-bag volumes, with pricing driven by fineness, coating and grade. Minimum orders typically start at one 20-foot container, and ELT loads and documents shipments from Cairo to Europe, the Gulf, Africa, Asia and the Americas. Request a sample and a datasheet to confirm fit before you commit.
Loading levels and savings
How much calcium carbonate you can add depends on the product and process, but filler loadings of 10-40% are common in polyolefin masterbatch, and even higher in some rigid PVC and woven applications. Because mineral filler costs a fraction of resin, every percent of well-dispersed calcium carbonate that replaces polymer lowers the cost per kilo of finished product. ELT helps compounders find the highest practical loading that still meets their strength, stiffness and finish targets.
Contact ELT (Egyptian Limestone Tiles)
ELT is a leading Egyptian calcium carbonate and limestone supplier, exporting factory-direct across the Middle East and worldwide. Need a quote, a datasheet, or a sample? Our export team replies within 24 hours.
💬 WhatsApp Us✉️ Email Our Experts📞 Call Us
- Mobile / WhatsApp: +20 100 926 7545
- Office: +20 2 2690 1767
- Email: [email protected]
- Head Office: 7 El Edrisi St., next to Heliopolis Sporting Club, Office 402, Cairo, Egypt
- Website: egyptianlimestonetiles.com
Frequently asked questions
Why is calcium carbonate added to plastics?
Calcium carbonate is added to plastics to lower cost, increase stiffness and dimensional stability, and improve processing by aiding heat transfer and reducing cycle times. As a filler masterbatch it can replace a significant share of resin while keeping the product’s mechanical properties within specification.
Should I use coated or uncoated calcium carbonate for plastics?
Coated calcium carbonate is usually best for plastics. The stearic-acid coating makes the powder hydrophobic so it disperses evenly in the polymer melt, prevents agglomeration and improves output and finish. ELT supplies both coated and uncoated grades and recommends the right one for your process.